As an Amazon Associate I earn from qualifying purchases.1. DR TOOLS
REAR Axle SUSPENSION CONTROL TRAILING ARM BUSH NEW REMOVAL REMOVER TOOL
DR TOOLS - Tool only for sale. For mazda: series 3 2003-2012 series 5 2005-2012. For volvo: c30 c30 electric c70 mk2 S40 mk2 V40, V50 Removal, mounting, Fitting, Installation, Press Bush Tool. For ford foucs mk1 mk2 mk3 kuga mk1 mk2 c-max cmax mk3. Sorry no bushes supplied.
| Brand | DR TOOLS |
| Manufacturer | DR TOOLS |
| Height | 25 |
| Length | 40 |
| Weight | 7.5 kg (16.53 Pounds) |
| Width | 25 |
| Part Number | b0056 |
2. prasku
Prasku Arm Suspension Tool Suspension Specialty Socket Tool
prasku - Easy and convenient to use. To install a ball joint on a lower control arm typically requires the effort of two people. But with this tool, it's a one-person job.
Material:approx. 105mm/4. 13in, color:Black. Made of high quality iron material, durable, practical. Car lower control Arm Prying Tool.
| Brand | prasku |
| Manufacturer | prasku |
| Part Number | 005d474e15b17433f326f8cfa9fece9a |
3. FACAIA
FACAIA Wishbone Lever Bar Extractor Tool, Bottom Arm Control Tool Wheel Bearing Set Ball Joint Suspension Arm Pry Bar Tool
FACAIA - With this lever tool the work can be accomplished safely and comfortably by one person no mauling on your own making it safe and simple to use. The ball joint or gaiter gets damaged, the mechanic injures himself or damages suspension parts when the tyre lever slips away.
The joint wedges again in the cone after it was pressed down only briefly with a tyre lever. After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabiliser tension in order to pull the joint from the support.
The wishbone extractor tool is for pushing down the wishbone and other suspension parts for example during the disassembly of the drive shaft or during the replacement or exchange of the wheel bearing.
4. WYZXR
Bottom Arm Control Tool Wheel Bearing Set Ball Joint Suspension Arm Pry Bar Tool, Wishbone Lever Bar Extractor Tool
WYZXR - After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabiliser tension in order to pull the joint from the support.
The joint wedges again in the cone after it was pressed down only briefly with a tyre lever. The ball joint or gaiter gets damaged, the mechanic injures himself or damages suspension parts when the tyre lever slips away.
With this lever tool the work can be accomplished safely and comfortably by one person no mauling on your own making it safe and simple to use. The wishbone extractor tool is for pushing down the wishbone and other suspension parts for example during the disassembly of the drive shaft or during the replacement or exchange of the wheel bearing.
5. MISSION AUTOMOTIVE
Suspension Specialty Bushing Tool Designed to Work With a 7/8 in. Diameter Pry Bar by Mission Automotive, 2 Pack Lower Control Arm Prying Tool
MISSION AUTOMOTIVE - Works with any 7/8" diameter pry bar - The hook end fits lower control arm; eyelet end fits any 7/8" pry bar. Works for most front-wheel drive Vehicles - Applicable for most front-wheel drive vehicles, import cars, domestic vehicles, and minivans.
Gets the job done right - our 2 pack lower control Arm Prying Tool is a specialty made pry bar to pry down the lower control arm to separate the lower ball joint. Turns a two man job into a one man job - installing wheel bearings, front axles and CV Joints used to require two people but now only requires one with this tool.
6. MERIGLARE
MERIGLARE Professional 105mm Lower Control Arm Prying Tool Suspension Specialty Bushing Tool
MERIGLARE - Easy and convenient to use. Made of high quality iron material, durable, practical. To install a ball joint on a lower control arm typically requires the effort of two people.
Material:approx. 105mm/4. 13in, color:Black. Car lower control Arm Prying Tool. But with this tool, it's a one-person job.
7. Draper
Draper 23251 Expert Suspension Arm Lever
Draper - Adjustable fulcrum gives maximum leverage with minimum effort. Soft grip handle with adjustable hook allows easy use on either side of the vehicle. Expert Quality. For use on suspension arm and hub work maintenance.
| Brand | Draper |
| Manufacturer | Draper |
| Height | 14.5 cm (5.71 Inches) |
| Length | 119.4 cm (47.01 Inches) |
| Weight | 5.91 kg (13.04 Pounds) |
| Width | 32.7 cm (12.87 Inches) |
| Part Number | LAL |
| Model | 23251 |
8. Bahco
Black, BAHCO Lever for Suspension Arms Paddles/Puncher/Spikes and Shovels
Bahco - Durable two-component handle made of PP+TPR for better grip and user protection. Long levers for easy lever and bending. Metal plug to allow lever to be hit by hammer. Chrome Finish. Each lever has different tip angles to suit different working situations, offering non-slip permeability.
| Brand | Bahco |
| Manufacturer | BAHCO |
| Height | 78 cm (30.71 Inches) |
| Length | 1000 cm (393.7 Inches) |
| Width | 25 cm (9.84 Inches) |
| Part Number | BS25 |
| Model | BS25 |
9. AB Tools-US Pro
90mm by U.S.PRO TOOLS AT091, Thin two jaw bearing puller/remover 30mm
AB Tools-US Pro - Applicable bearing dimension: 30-90mm Diameter. Special Design for narrow spaces. Jaw thickness: 1. 5mm. Working Depth: 93mm. Made from Chrome Vanadium Steel.
prasku - Easy and convenient to use. To install a ball joint on a lower control arm typically requires the effort of two people. But with this tool, it's a one-person job. Material:approx. 105mm/4. 13in, color:Black. Made of high quality iron material, durable, practical. Car lower control Arm Prying Tool.
FACAIA - With this lever tool the work can be accomplished safely and comfortably by one person no mauling on your own making it safe and simple to use. The ball joint or gaiter gets damaged, the mechanic injures himself or damages suspension parts when the tyre lever slips away.
WYZXR - After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabiliser tension in order to pull the joint from the support.
MISSION AUTOMOTIVE - Works with any 7/8" diameter pry bar - The hook end fits lower control arm; eyelet end fits any 7/8" pry bar. Works for most front-wheel drive Vehicles - Applicable for most front-wheel drive vehicles, import cars, domestic vehicles, and minivans. Gets the job done right - our 2 pack lower control Arm Prying Tool is a specialty made pry bar to pry down the lower control arm to separate the lower ball joint. Turns a two man job into a one man job - installing wheel bearings, front axles and CV Joints used to require two people but now only requires one with this tool.
MERIGLARE - Easy and convenient to use. Made of high quality iron material, durable, practical. To install a ball joint on a lower control arm typically requires the effort of two people. Material:approx. 105mm/4. 13in, color:Black. Car lower control Arm Prying Tool. But with this tool, it's a one-person job.
Draper - Adjustable fulcrum gives maximum leverage with minimum effort. Soft grip handle with adjustable hook allows easy use on either side of the vehicle. Expert Quality. For use on suspension arm and hub work maintenance.
AB Tools-US Pro - Applicable bearing dimension: 30-90mm Diameter. Special Design for narrow spaces. Jaw thickness: 1. 5mm. Working Depth: 93mm. Made from Chrome Vanadium Steel.
