As an Amazon Associate I earn from qualifying purchases.
Milwaukee 14-46-1011 Quick Lock Clamp Kit for Reciprocating SawMILWAUKEE'S
- 5-inch long, 2-inch wide, and 2-Inch high. Package weight of this item is 2-Pound. Quick lock clamp kit is used on reciprocating saw. Part fits model number 6521-50 This part contains seven parts.
|Height||5.08 cm (2 Inches)|
|Length||12.7 cm (5 Inches)|
|Weight||0.05 kg (0.1 Pounds)|
|Width||5.08 cm (2 Inches)|
Milwaukee 4932352473 Fixtec Nut, MultiMilwaukee
- The milwaukee fixtec quick locking flange nut replaces standard m14 flanges on grinders, to enable fast tool-less disc changes. Fits bosch, Makita Dealt & more.
|Height||1.2 cm (0.47 Inches)|
|Length||19 cm (7.48 Inches)|
|Weight||0.07 kg (0.15 Pounds)|
|Width||10 cm (3.94 Inches)|
Mioloe 3Pcs Angle Grinder Inner Outer Flange Lock Nut M14 Quick Clamping Nut Power Replacement for Bosch Metabo Milwaukee MakitaMioloe
- Satisfaction supporthigh quality : if you have any problem with the bottle Opener you purchased from us, please feel free to contact us and we will give you a satisfactory solution within 24h! Diameter: 46-50 mm. Height: 13mm. Self-locking pressure Plate Thickness: 13 mm.
Package includes: 3 pack Angle Grinder Inner Outer Lock Flange Nut. Exquisite workmanship: the bottom has a fine frosted texture to increase friction, and the nut can firmly lock the grinding wheel and it is not easy to slip.
Before use, check the nut for defects and damage to avoid safety accidents. Premium material: this clamping nut angle grinder is a high-strength alloy material, high-strength work does not deform, can withstand a torque of 40N and a high speed of 12000rpm, the quality is guaranteed and the service life is long.
Widely used: the clamping nut is suitable for all angle grinders with an m14 interface on the market, hilti, diamond plates and other types of Grinding wheels. Note: if the torque is too much to remove, and diamond cutting discs, grinding discs, for DeWalt, cup-shaped grinding discs, Metabo, Bosch, you can line up the hole with a conventional 2 prong wrench to remove it.
Milwaukee Genuine OEM 48-03-1050 Spanner Wrench and Spindle Flange Lock Nut Combination Kit for Angle Grinders with 5/8 Inch 11 Spindles Angle Grinder Not IncludedMilwaukee
- Printed instructions are on the package, allowing for easy installation onto your grinder. Spanner: a spanner is included to keep the nut properly fastened to your grinder. Tough metal construction of the spanner lets you use it over and over again with minimal wear and tear.
Universal nut: this nut will fit with grinders that have a 5/8" x 11 spindle. Application: use this to keep metal discs properly attached to your angle grinder, keeping it in top working condition.
|Height||1.91 cm (0.75 Inches)|
|Length||20.02 cm (7.88 Inches)|
|Width||9.86 cm (3.88 Inches)|
1 x SabreCut GRNSCA 46mm M14 Quick Change Heavy Duty Black Phosphate Angle Grinder Locking Retaining Flange NutSabreCut
- Premium quality black phosphate coating which resists corrosion. 1 piece sabrecut black Phosphate Coated M14 quick release angle grinder locking flange nut.
Knurled finish on the side and base which aids grip when tightening and unfastening. Fast and frustration free accessory changes on your angle grinder. Heavy duty retaining flange nut for all angle grinders with a M14 thread.
6. GOH DODD
Surface Conditioning Discs, GOH DODD 2 inch Sanding Discs with 1/4" Holder for Die Grinder Surface Prep Strip Grind Polish Finish Burr Rust Paint Removal, 60 Pieces Quick Change Discs SetGOH DODD
- High performance: fits various surface conditioning and preconditioning, self-sharpening, cleaning, polishing, stripping, grinding, sanding, oil paint removal, rust removal, glue or adhesive removal, finishing, deburring, etc.
Quick change and steady desigh: with unique safety torque spiral, ensures steady working and no fall out. Roll lock quick-change design, the connection between sanding disc and holder/tray get firmly when rotating, just twist it to remove or connect.
Improve the grinding efficiency and service life: Aluminium Oxide corundum abrasive grain has high abrasion resistance and hardness, and the surface is attached with thermal and blocking resistant coating, which can improve the grinding efficiency and service life.
Unique safety torque screw: Quick change disc has unique safety torque screw, strong wear resistance and fast grinding force. 36# 60# 80# 120# 180# 240#, 10 pcs each, total of 60 PCS.
Ventvinal SDS Clic M14 Quick-Release Nut for All Angle Grinders. 1 x Clamping NutVentvinal
- Quick-release nuts: quick release nuts with M14 thread for quick attachment and loosening of diamond cutting discs, pot washers, grinding wheels and other accessories. Wipe the abrasive, the spindle and the quick-release nut clean before use to prevent foreign bodies from snagging.
Non-slip design: the underside has a fine frosted texture so that the nut locks the disc firmly without slipping.
Diameter 49 mm; height 13 mm. Material: made of high-strength alloy, can withstand a torque of 40 nm and a high speed of 12, 000 rpm, high-strength performance without deformation, resulting in a longer service life.
Compatibility: suitable for all m14 interface angle grinders available on the market, pot discs, grinding discs, and for most types of diamond cutting discs, diamond plates, etc. Please note: to avoid a safety accident, please check the nut before use to ensure that it is not defective or damaged.
G.COUPLER + G.SPARES Kit, The Original Lock-On Zerk Fitting Grease Gun G Coupler M10x1GURTECH
- Functional: choose from m10x1, electric, 1/8" bsp, or 1/8" npt thread connections for compatibility to all available Grease Gun Brands & regional specifications. Depress the trigger again to release, no more twisting or yanking, 000psi. Saves you money: our rebuildable hands-free g.
Coupler is the leader in lubricant delivery technology. Functional: choose from m10x1, or 1/8" npt thread connections for compatibility to all available Grease Gun Brands & regional specifications.
Quick & easy: depress the trigger & attach to the desired zerk fitting. The lever-action mechanism locks the G. Coupler to the zerk, even under maximum operating pressures of 690bar / 10, creating a leak-proof seal to the joint.
Our G. Coupler fits all sae and metric din Zerk fitting grease nipples and works with battery, pneumatic, and manual grease guns. Our G. Coupler fits all sae and metric din zerk fitting grease nipples and works with battery, pneumatic, 1/8" BSP, electric, and manual grease guns. If the internal seal is damaged by a burred Zerk, or simply because it has reached its service life, hard contaminant, use the included G. Spares kit to fully rebuild your G. Coupler.
|Weight||0.1 kg (0.21 Pounds)|
SovelyBoFan Grinder Flange ngle Wrench Spanner Metal Lock Nut for Milwaukee 193465-4 Black & Ryobi 4.5 5 5/8-11SovelyBoFan
- Provide reference to the following compatibility list is. Please check the size chart carefully before ordering, this ruler, comptibility, thank you.
Ngle grinder flange nut indoor nd outdoor, spanner wrench. Replace 224399 - 1, 193465 - 4, 224568 - 4 parts. Outer nut size: 1. 59 cm - for ll small requirements of 4 - 1/2, 25. 4 cm, 2032 cm, with 5/8 - threaded shaft.