Top 9 Chair Table Adjustable UK – Furniture Legs

As an Amazon Associate I earn from qualifying purchases.

1. INCREWAY

INCREWAY Swivel Furniture Leg Levelers, 4PCS Adjustable Leveling Feet Glide Durable Metal T-Nut Leveler Sliders Protectors for Chair Table SofaGold

INCREWAY - Adjustable height & angle--you can adjust the height of the furniture leg sliders by screwing in leveler to the height as you need. The angle can be adjusted between 70 degree to 90 degree.

Wild application--suitable for chair, cabinet and some heavy furniture, sofa, table, product your floor from damage. Stainless steel material--the thread is made of stainless steel material, the base is made of silent matte plastic, rust-proof and corrosion resistant, sturdy and durable, reduce the noise and bring convenient for your life. What you get--4pcs swivel furniture leg levelers, thread length:50mm/1. 97inch; thread diameter:9. 6mm/038inch; base diameter:34. 4mm/1. 35inch. Easy to use--mark the height on the drill bit, then drill the hole on the furniture to the height you mark, put the thread into the hole with the screwdriver, screw the leveler to a suitable height.
BrandINCREWAY
ManufacturerINCREWAY
Height2 cm (0.79 Inches)
Length17 cm (6.69 Inches)
Width12 cm (4.72 Inches)
Part NumberINC-YF07-008-EU8

2. JJQHYC

JJQHYC Adjusting Screws M10 x 50 mm Leveling Legs Furniture Leveling Feet Adjustable Feet for Table Chair Sofa

JJQHYC - Your furniture no longer squeaks, and does not scratch the floor. A good helper for diy and repairing furniture, office desks and chairs, wooden workbenches, suitable for furniture, shelves, etc.

The furniture legs have deep thread, easy to attach, not easy to fall off after fixing, and the height can be adjusted according to your needs. Galvanised furniture feet are strong and durable, and the plastic base can effectively prevent the wooden table and chair feet from corroding by moisture. Dimensions: 4 pcs adjustable feet, Thread M10 x 50mm, Base diameter: 38mm. The bottom of the adjustable foot is made of nylon material, which is very quiet when rubbing on the ground. Adjust the unstable stool legs to a consistent level for balance.
BrandJJQHYC
ManufacturerJJQHYC
Height5 cm (1.97 Inches)
Length1 cm (0.39 Inches)
Width1 cm (0.39 Inches)

3. Xingrun

20 Pcs Adjustable Furniture Feet Leveling Glides, Chair Leg Levelers for Furniture, Couches, Bed, Chairs,with Nuts and Drill Bits, Table Leg

Xingrun - You will get: pack of 20 adjustable Furniture Leg Leveling Foot with T-nut Kit,1 pcs Woodworking drill. Material: made of metal and plastic, wear-resistant, and non-slip, will prevent furniture from leaving rust on your house even in humid environment.

Size:thread screw size : 8 x 30mm d*l,base diameter : 39mm;Nut size:9x9mm(D*L), 10mm drill bit. Application: fit for chairs, sofas, dressing tables, dining room furniture, cabinets, desks, etc. Easy to install: find the position you want to level, use drill bit to drill a hole, then use matching T-nuts to fix metal furniture levelers to help you adjust the height and install adjustable feet well in a few minutes.
BrandXingrun
Manufacturerboaoxintrading
Height3 cm (1.18 Inches)
Length0.8 cm (0.31 Inches)
Width0.8 cm (0.31 Inches)
Part Numberddg097

4. Sourcingmap

Sourcingmap Furniture Table Chair 8 Holes Base Adjustable Leveling Foot M8 x 10mm Male Thread 20pcs Black

Sourcingmap - Hole diameter: 5mm/02"; type: Screw On. Color: black, silver tone; material: Plastic, Metal; Net Weight: 245g. Total height: 22mm/09"; thread size: m8 x 10mm/M8x 04"d*l. Holes number: 8; base size: 30 x 11mm/1. 2"x 04"max. D*t. Package content: 20 x leveling feet; product name: leveling Foot; Total Size: 30 x 22mm/1. 2" x 09"max. D*h.
BrandSourcingmap
ManufacturerSourcingmap
Height1 cm (0.39 Inches)
Length0.8 cm (0.31 Inches)
Width0.8 cm (0.31 Inches)
Part Numbera16050600ux0634
Modela16050600ux0634

5. TAIANJI

T- Nut Kit 3/8”-16 Thread, Support 1320LBs, Large Base,w/ 4 Felt Pads,Leveling Feet for Tables Chairs Cabinets Sofa Raiser, 4PCS Height Adjuster Furniture Levellers Foot Adjustable Cabinet Feet

TAIANJI - Useful tools-- come with 4 felt pads to protects your floor from scratches or harsh noise, anti-slip and durable. Strong stability-- adjustable feet can help the asymmetric furniture legs to effectively adjust, chairs, workbench, maintain the balance of the furniture, cabinets, can be installed on tables, and so much more furniture.

Easy to install-- just pre-drill a 1cm/04in hole with enough depth and insert a T-nut, then screw on the level and adjust height you want. Durable and heavy duty-- these table leveling feet made of heavy duty iron with rust-proof coating, strong load bearing up to 150kg/330lbs for each screw leg, solid and wear-proof, 600 kg/1320 lbs for 4 furniture leveling screws. Adjustable height-- table leveler feet 5. 75cm/2. 26in in total height, can be adjusted within 0 to 2. 3cm/09in to get the height you need.
BrandTAIANJI
ManufacturerTAIANJI
Height3.5 cm (1.38 Inches)
Length5 cm (1.97 Inches)
Width3.5 cm (1.38 Inches)
Part NumberZCJEU093
ModelZCJEU093

6. Pulluo

Pulluo 20 Pack Adjustable Table Foot Furniture Leveling Feet M8x24mm Threaded Levelling Feet Screw On Furniture Leveller Foot Floor Protector Round Base Foot Screw for Chair Leg

Pulluo - Package includes20pcs furniture levellers, cabinets, size: M8 x 20 x 24mm, restaurants, tables, suitable for light furniture in chairs, offices or homes. Easy to usejust drill a 5/16"hole that's 4/5 deep at each corner, table leveling foot base feet pads are easy to install and adjustable height as your require, adjustable table feet easy to use.

Materialscrew in feet floor protector is made of high-quality rubber and metal, M8 thread is deep, not easy to rust, durable, not easy to slide when rotating, reducing noise when furniture moves. Adjustable heightadjustable furniture screws can help you adjust the height of chairs, tables and cabinets, The minimum height is 8 mm and the maximum height is 25 mm.

Functionlow profile adjustable feet wth rubber round base, strong and stable, smooth surface, will not cause damage and scratches to the floor, thick base, and effectively protect the chair feet and the floor.
BrandPulluo
ManufacturerPulluo
Height2.4 cm (0.94 Inches)
Length2 cm (0.79 Inches)
Width2 cm (0.79 Inches)

7. UTRUGAN

Black, UTRUGAN 20Pcs Furniture Leveling Feet, M8*20mm Adjustable Threaded Foot Non-Slip Adjustable Furniture Feet Leveling Glides Screw in Table Chair Leveling Foot for Furniture, Floor Protectors

UTRUGAN - After fixing, flexibly to meet the needs of the family. 20 adjustable furniture feet-you will receive 20 adjustable leveling feet, which is enough to meet your daily different furniture needs. It is widely used in homes, suitable for chairs, cafes, offices, meeting rooms, cabinets, restaurants, sofas, dressing tables, desks, etc.

It can prevent noise to a certain extent and provide you with a comfortable and quiet environment. Keep furniture balance-the table chair adjustable leveling foot is used on the bottom of furniture to help maintain balance. The size of the threaded part is 8 x 20mm D*L, the base diameter is 24mm, and the height is 28mm, suitable for light furniture. It can also keep your furniture away from wet floors and keep the furniture clean and beautiful. The plastic base is rust-proof and non-slip, load-bearing, wear-resistant, which helps protect your floor. The thread is finely crafted and deep, and it is not easy to slip or fall off when rotating.

Wear-resistant metal materials-the furniture leveling foot is made of high-quality metal, durable and easy to install, has a long service life. It is the perfect solution for uneven and wobbly table legs, help you protect your furniture and prevent floor scratches. Adjustable threaded foot-using the furniture leveling foot, you can still choose to adjust the height of the screw according to your preference, you can adjust furniture such as chairs and tables to the height you want. Wide application-the leveling foot can adjust furniture feet, conference tables and display racks.
BrandUTRUGAN
ManufacturerUTRUGAN
Height0.79
Length0.8 cm (0.31 Inches)
Width0.8 cm (0.31 Inches)

8. IGNPION

8Pcs Metal Leveling Feet M8 Thread Furniture Chair Table Leg Adjusters Leveler, IGNPION Swivel Furniture Adjustable Feets

IGNPION - The angle from 90° to 70° from the floor. Each leg leveler supports 80 lb of load. Screw bolt with 360°swivel design- could adjust the angle of screw bolt according the floor need.

Made of steel bolt and white nylon base. Easy to install -use a drill stop tape as the drill stop will ensure a proper hole depth, tap in T-nuts, drill a hole in each corner, screw in leveler. Nylon plastic base effective reduce friction and noise while moving furniture. Package includes: 8pcs furniture leveler. Easily level the furniture feet or fit the uneven floor surface. Each leveler could be adjusted from 2 to4 in height to meet with different needs. Perfect for protect your floor and get rid of the shaking furniture. The base diameter: 29mm, thread size is 5/16"-18s"x 1-1/2”, screw Bolt Diameter: 8mm.
BrandIGNPION
ManufacturerIGNPION
Part NumberIGN484

9. HJLIKE

HJLIKE 4 Pcs Adjustable Furniture Leveling Feet, Heavy Duty Leg Raiser for Table Chairs Cabinets Sofa Raiser Table black-5cm-splint

HJLIKE - Universal design:our adjustable leg levelers can be installed on tables, and so much more. Note: the furniture needs to be lifted instead of pushed and pulled when moving, which is beneficial to prolong the service life of the furniture feet.

Basic function: splint type heightening foot pad compensate for uneven floors It is an ideal choice for coffee tables, shelves, sofas, bathroom cabinets, office furniture, TV cabinets, beds, kitchens, cabinets, etc. Features: the plastic part design will not wear your painted partitions or wooden floors The lightweight design of stainless steel.

Package included: 4x adjustable feet levelers, Widely used in furniture table, cabinets, washing machine base, bathroom cabinets, chair, outdoor patio furniture chair table and more. Whenever your home or workplace needs furniture leveling assistance, plant stands, chairs, kitchen cabinets, our leg levelers can fix it quickly while not compromising the look.
BrandHJLIKE
ManufacturerHJLIKE0000028
Height1
Length1
Weight1
Width1
Part NumberHJLIKE0000028