As an Amazon Associate I earn from qualifying purchases.1. Plumb Pak
Plumb-Pak Compression Wallplate Elbow 15mm x 1/2inch Female
Plumb Pak - Brass compression fitting. Suitable for hot and cold water use. Suitable for use with garden bib taps.
2. ePlumb
15mm Brass Compression Fitting to 1/2" BSP Female Threaded Iron Back Plate Elbow
ePlumb - Manufactured from brass to British Standard EN1254-2. Fully wrAS approved. A brass 15mm compression fitting including olive to 1/2" BSP female thread on a 90 degree back plate elbow. Exclusively available from ePlumb Shop. Easy to install with no soldering required.
3. Wärmer System
1/2" Garden BIB TAP Water Lever Type Valve RED Handle + Garden Hose Plug+Bulk Hardware BH02299 Compression Fitting Wall Plate Elbow, 15 mm, Brass
Wärmer System - Outdoor garden brass tap water lever type valve 1/2". Working media:water heat and cold water systems. Nominal pressure 10Bar Max working temperature 100degres. Wärmer System. Made from solid brass and finished in chrome.
4. BFG
20 mm MDPE Compression Wall Plate Elbow with 1/2" BSP Female Thread
BFG - Suitable for use with 20 mm External diameter solid MDPE / Alkathene etc pipe. Ideal for allotments, gardens, garages, farms and building sites etc. Use where a semi-permanent water supply is required. Wall plate elbow with 20 mm Input.
5. Wärmer System
Brass+PTFE Tape, padlocking tap Compression Fitting Wall Plate Elbow, Wärmer System tap Valve Lock by Padlock, 15 mm
Wärmer System - Made from solid brass and finished in chrome. Nominal pressure 10Bar Max working temperature 100degres. By wärmer system psw trade suppLIERS LTD. Package contains: 1 tap, 1 wallplate elbow, 1 PTFE Tape. Lock by Padlock.
6. Mavros Supplies
Wall Plate Brass compression fittings, metric, 15MM OD X 1/2 WALLPLATE ELBOW
Mavros Supplies - Elbows. Wall Plate. Brass compression fittings, metric. 15mm od x 1/2" wallplate elbow. Adaptors and Fittings.
7. Plumbob
Plumbob 571005 MDPE Wall Plate Elbow 20mm x 1/2"
Plumbob - Co-polymer polypropylene body, nut & thrust ring. Compression fittings. Pn16 rating. Suitable for underground cold water systems. Highly durable grab ring & nitrile seal.
| Brand | Plumbob |
| Manufacturer | Plumbob |
| Height | 6.1 cm (2.4 Inches) |
| Length | 9 cm (3.54 Inches) |
| Width | 4.8 cm (1.89 Inches) |
| Part Number | 571005 |
| Model | 571005 |
8. BFG
20 mm MDPE COMPRESSION WALL PLATE ELBOW WITH GARDEN BIB BLUE HANDLE TAP AND HOSE TAIL
BFG - Wall plate elbow with 20 mm Input. Use where a semi-permanent water supply is required. Ideal for allotments, garages, gardens, farms and building sites etc. Incorporating 1/2" Bib Tap and Hose Tail. Suitable for use with 20 mm External diameter solid MDPE / Alkathene etc pipe.
ePlumb - Manufactured from brass to British Standard EN1254-2. Fully wrAS approved. A brass 15mm compression fitting including olive to 1/2" BSP female thread on a 90 degree back plate elbow. Exclusively available from ePlumb Shop. Easy to install with no soldering required.
Wärmer System - Made from solid brass and finished in chrome. Nominal pressure 10Bar Max working temperature 100degres. By wärmer system psw trade suppLIERS LTD. Package contains: 1 tap, 1 wallplate elbow, 1 PTFE Tape. Lock by Padlock.
