Top 7 Concrete Mould Release UK – Lubricants

As an Amazon Associate I earn from qualifying purchases.

1. Morris Lubricants

Morris Tabor 95 Concrete Mould Release Oil, 25 Litres

Morris Lubricants - Protects steel moulds from rust when in use, between shifts and when being stored between jobs. Is not easily absorbed by wooden moulds. Specially designed for production of slabs, posts and pavings where precision steel moulds are used. Is not absorbed by the concrete, and does not interfere with the drying out process. Does not cause stains or discolouration of the concrete.
BrandMorris Lubricants
ManufacturerMorris Lubricants
Part NumberTAB025

2. Carbusonic

Carbusonic Ornamental Concrete Mould Release Agent 1lt

Carbusonic - Suitable for all types Of Concrete Moulds And Forms. Greatly reduces Blowholes, Surface Blemishes And Staining. Easily sprayed Or Brushed On. Provides quick, Positive Release Of Formwork. Waterbased Voc Free.
ManufacturerApl Chemicals
Height15 cm (5.91 Inches)
Length15 cm (5.91 Inches)
Weight1 kg (2.2 Pounds)
Width15 cm (5.91 Inches)

3. Carbusonic

Concrete Mould Release Agent 1 Litre Garden Ornament mouldings Safe

Carbusonic - Completely free From Hydrocarbons Ideal For Confined Areas. Suitable for all types Of Concrete Moulds And Forms. Suitable for latex rubber plastic wood and metal moulds. Waterbased Voc Free. Provides quick & positive Release Of Latex, Rubber, Wood and Metal.
ManufacturerCarbusonic limited
Part Numbercmra500ml

4. Carbusonic LTD

Mould Release Oil 5Lt for Easy Release from All Types of Concrete Moulds and Forms 5 Litre

Carbusonic LTD - Gives easy release from all types of concrete moulds and forms. Economic use up to 60 m per litre. Low viscosity easily sprayed or hand applied. Supplied ready to use. Modern chemical release agent- non flammable.
BrandCarbusonic LTD
ManufacturerApl Chemicals
Height30 cm (11.81 Inches)
Length30 cm (11.81 Inches)
Weight6 kg (13.23 Pounds)
Width20 cm (7.87 Inches)
Part Numberdf4

5. Polycraft ( MB Fibreglass )

Polycraft Concrete Release Agent, 1 Litre 1000ml

Polycraft ( MB Fibreglass ) - Concrete release Agent is ready for use and should not be diluted. It should be applied as thinly and evenly as possible for optimum performance. It can be applied to all types of mould system by spray, fine-haired brush, swab or roller. It will not clog fine jets even at low temperatures.
BrandPolycraft ( MB Fibreglass )
ManufacturerPolycraft ( MB Fibreglass )

6. Everbuild

Everbuild 206 Trade Strength Strike Release Oil, 5 Litre

Everbuild - Size: 5lTR. Excellent 'sticking' ability on vertical mould surfaces. 206 strike Release Oil. Everbuild 206 strike release Oil is a high quality chemical release agent that enables concrete shuttering to be removed easily. Solvent and mineral oil free. Self-levelling after spray application. Brand: Everbuild. Leaves the edge of the concrete structure clean and well formed.
ManufacturerSika Everbuild
Height28.5 cm (11.22 Inches)
Length13 cm (5.12 Inches)
Weight2.27 kg (5 Pounds)
Width18 cm (7.09 Inches)

7. Everbuild

Everbuild All Purpose Silicone Spray, 400 ml

Everbuild - Colourless and leaves a dry, non-stick finish within seconds making it also suitable for restoring car vinyl to a gloss finish without the need for polish. Quick drying with a dry touch free finish in seconds. Can be used a general purpose high quality lubricant ideal for many uses all round the home, garage or workshop. Silicone release agent designed for releasing friction between two surfaces, ideal for rubber gasket installation and for mould making.
Height19.81 cm (7.8 Inches)
Length6.4 cm (2.52 Inches)
Weight0.34 kg (0.75 Pounds)
Width6.4 cm (2.52 Inches)