Top 10 Trend Snappy Drill Bits UK – Drill Bit Sets

As an Amazon Associate I earn from qualifying purchases.

1. Trend

7 Pieces, Trend SNAP/D/SET Snappy Imperial Drill Set

Trend - The hss drill bits are gripped by a spring steel collet into the hex shaft. 1 x robertson No 1 Screwdriver bits. 1 x robertson No 2 Screwdriver bits. The hex shanks snap into the Quick Chuck. Easy to Use. Square Robertson screwdriver bits.
BrandTrend
ManufacturerTrend
Height20 cm (7.87 Inches)
Length16 cm (6.3 Inches)
Weight0.22 kg (0.49 Pounds)
Width3 cm (1.18 Inches)
Part NumberSNAP/D/SET
ModelSNAP/D/SET

2. Trend

Trend SNAP/PC/A Snappy 4-Piece Countersink Drill Bit Set

Trend - Professional and accurate: matched drill countersink/counterbore and plug cutters for No8 and No10 screw sizes to achieve consistent and ideal finish on any work. Durable design: cuts uniform plugs with a chamfer top for easier starting when driving, eliminating damage to the counterbore. Matched drill countersink/counterbore and plug cutters for No8 and No10 screw sizes to achieve accurate, consistent and professional finish on any work.

Quick release 1/4inch hex shank for fast swapping between drill and plug cutter for an ideal time saving solution. Cut plugs from any scraps or offcuts to match the work for a perfectly disguising screws on high class work. Cuts uniform plugs with a chamfer top for easier starting when driving, eliminating damage to the counterbore. Ideal use: cut plugs from any scraps or offcuts to match the work for a perfectly disguising screws on high class work; Cuts uniform plugs with a chamfer top for easier starting when inserting, eliminating damage to the surface.

Part of the trend snappy range: compatible with Snappy or compatible chucks; Quick release 1/4inch hex shank for fast swapping between drill and plug cutter for an ideal time-saving solution. Adaptable: can be used for countersinking for clean, uniform screw positioning on hard and softwoods, drilling a pilot hole and countersink or counterbore in one operation for speedy setting of fixings. Part of the trend snappy range, compatible with Snappy or compatible chucks. Can be used for countersinking for clean, uniform screw positioning on hard and softwoods, drilling a pilot hole and countersink or counterbore in one operation for speedy setting of fixings.
BrandTrend
ManufacturerTrend
Height3 cm (1.18 Inches)
Length18.2 cm (7.17 Inches)
Width14.7 cm (5.79 Inches)
Part NumberSNAP/PC/516
ModelSNAP/PC/A

3. snappy

Snappy SNAP/DBG/9 Trend Centring Guide 9/64" 3.5mm Drill

snappy - Makes the correct sized pilot hole for any fitting that requires No10 gauge screws. Direct fit to trend snappy Chucks with spring loaded drill bit for fast action in hard and softwoods. Eliminates any problems of off set screws, for professional, misalignment of fittings or screwheads sticking up, consistent flush fitting results every time. With its bevelled nose design, the Drill Bit Guide automatically self centres when positioned in a countersink. The perfect accessory for making centralised pilot holes when fitting countersunk hinges and other ironmongery.
Brandsnappy
ManufacturerTrend
Height1.4 cm (0.55 Inches)
Length15 cm (5.91 Inches)
Weight0.05 kg (0.11 Pounds)
Width8 cm (3.15 Inches)
Part NumberSNAP/DBG/9
ModelSNAP/DBG/9

4. Trend

Trend WP-SNAP/D/564 5/64in Replacement Bit Snappy Drill Countersinks SNAP/CS/4 & SNAP/CS/4TC, Black

Trend - Plugs are parallel sided. Made from tool steel they allow for longer plugs to be drilled. Recommended for use with a pillar Drill. Item package weight: 002 kilograms.
BrandTrend
ManufacturerTrend
Height1.2 cm (0.47 Inches)
Length15 cm (5.91 Inches)
Width8 cm (3.15 Inches)
Part NumberWP-SNAP/D/564
ModelWP-SNAP/D/564
Warranty12 months.

5. Trend

Trend Snap/CS/Set 5-Piece Drill Countersink Set

Trend - Applications: quick and accurate professional finish; Countersink and counterbore for suitable plug to be fitted over the screwhead; Secured with hex wrench for easy replacement and adjustment; Adjusted to suit timber thicknesses or screw lengths.

8; 3. 2mm drill and C/S size No. 1/4-inch hex shank: as part of the trend snappy range, the 1/4inch hex shank is compatible with The Trend Snappy Chuck and other quick release systems for fast swapping between accessories for increased efficiency. 4; 2. 4mm drill and c/s size no. Durable construction: each countersink is made from heat treated tool steel for durable and repeatable performance with easily replaceable HSS High Speed Steel drill bits.

6; 2. 8mm drill and c/S size No. Sizes: 2. 0mm drill and c/s size no. Uniform countersinking: perfect for where the screws are on show, or to make deeper counterbores to disguise their position with matched wood plugs. 10; 3. 6mm drill and C/S size No. 12.
BrandTrend
ManufacturerTrend
Height2 cm (0.79 Inches)
Length18.3 cm (7.2 Inches)
Weight0.14 kg (0.31 Pounds)
Width14.6 cm (5.75 Inches)
Part NumberSNAP/CS/SET
ModelSNAP/CS/SET

6. snappy

14.0 mm*150.0 mm*80.0 mm, Trend Snappy SNAP/DBG/5 Drill Bit Guide, for No6 Gauge Screws, Silver

snappy - Makes the correct sized pilot hole for any fitting that requires No6 gauge screws. Direct fit to trend snappy Chucks with spring loaded drill bit for fast action in hard and softwoods. The perfect accessory for making centralised pilot holes when fitting countersunk hinges and other ironmongery. Eliminates any problems of off set screws, for professional, misalignment of fittings or screwheads sticking up, consistent flush fitting results every time. With its bevelled nose design, the Drill Bit Guide automatically self centres when positioned in a countersink.
Brandsnappy
ManufacturerTrend
Height1.4 cm (0.55 Inches)
Length15 cm (5.91 Inches)
Weight0.02 kg (0.04 Pounds)
Width8 cm (3.15 Inches)
Part NumberSNAP/DBG/5
ModelSNAP/DBG/5

7. Trend

Silver, Trend SNAP/DB7L/5 6 Pack 7/64" Diameter Extra Long Replacement Snappy SNAP/DBG/7 Drill Bit Guide

Trend - Item package weight: 16 grams. Pack of 5 extra long drills to suit drill bit guide. Color: Silver. Brand: Trend.
BrandTrend
ManufacturerTrend
Height3.6 cm (1.42 Inches)
Length7.4 cm (2.91 Inches)
Weight0.02 kg (0.04 Pounds)
Width3.6 cm (1.42 Inches)
Part NumberSNAP/DB7L/5
ModelSNAP/DB7L/5

8. Trend

Trend WP-SNAP/D/764S Snappy Drill Bit 7/64 For SNAP/CSDS/8TC

Trend - Replacement drill for the snap/CSDS/5Mmt. Diameter metric: 5 overall length metric: 62. Dimensions: d=5 mm OL=62 mm.
BrandTrend
ManufacturerTrend
Height6.2 cm (2.44 Inches)
Length1 cm (0.39 Inches)
Width0.5 cm (0.2 Inches)
Part NumberWP-SNAP/D/764S
ModelWP-SNAP/D/764S

9. Trend

For No6, 8 & 10 Gauge Screws, Trend SNAP/DBG/A Snappy Drill Bit Guide Set

Trend - Makes the correct sized pilot holes for any fitting that requires No6, 8 or 10 gauge screws. Eliminates any problems of off set screws, for professional, misalignment of fittings or screwheads sticking up, consistent flush fitting results every time.

Direct fit to trend snappy Chucks for fast, efficient working practice and quick swaps between accessories. Makes perfectly centralised pilot holes when fitting countersunk hinges and other ironmongery. The essential drill bit guide set for all common countersink sizes from N06 to No10 gauge, complete with No2 Philips and No2 Pozi 50mm long screw driver bits.
BrandTrend
ManufacturerTrend
Height2 cm (0.79 Inches)
Length18.4 cm (7.24 Inches)
Width14.6 cm (5.75 Inches)
Part NumberSNAP/DBG/A
ModelSNAP/DBG/A

10. Trend

Silver, Trend WP-SNAP/D/18 3/32in Replacement Bit Snappy Drill Countersinks SNAP/CS/6 & SNAP/CS/6TC

Trend - Item package quantity: 1. These trimmers with shank Mounted bearings are ideal for template guidance. Extra care must be taken to avoid cutter breakage. Use for rebating and trimming edges only.
BrandTrend
ManufacturerTrend
Height1.2 cm (0.47 Inches)
Length15 cm (5.91 Inches)
Width8 cm (3.15 Inches)
Part NumberWP-SNAP/D/18
ModelWP-SNAP/D/18
Warranty12 months.