As an Amazon Associate I earn from qualifying purchases.
1/8 Inch Desoldering Wick Solder Braid Desoldering Braid, 5 Feet, 2 PackeBoot
- Enclosed in the container: the desoldering wire comes on a small plastic reel; Can keep it enclosed in the container when not in use to avoid contamination and keep its effectiveness.
Wide usage: solder braid can be applied to do some soldering and desoldering work, such as removing or replacing bad capacitors from a broken LCD monitor, PC board pad and so on. Abundant solder wick: 2 pack 5 feet solder wick is enough for you to wick the old solder into it and out of the component lead hole.
Desoldering wick: the desoldering wick is pure oxygen free copper, 1/ 8 inch in width and 5 feet in length; Desoldering wick braid with unique, no clean flux and geometrically precise weave. Use with soldering iron: you can simply hold the desoldering braid against the PC board solder joint, and then touch it with your soldering iron for desoldering quickly.
|Height||1.2 cm (0.47 Inches)|
|Length||4.8 cm (1.89 Inches)|
|Weight||0.01 kg (0.03 Pounds)|
|Width||4.8 cm (1.89 Inches)|
2. MG Chemicals
MG Chemicals Desoldering Braid #4 Fine Braid Super Wick for Lead Free Solder, 0.10" Width x 5' LengthMG Chemicals
- Specifically designed for high temperature, lead free solders. Nsf - nonfood compounds program Listed P1, Nsf Registration #154375. Great with conventional tin/lead solders. For lead free solder. Use to remove lead free solder during circuit repair. Rohs compliant.
SIQUK 7 Pieces Solder Sucker Desoldering Wick Kit Including 1 Pc Desoldering Sucker 6 Pcs Solder Braid Solder Wick with Flux, Desoldering Vacuum Pump Solder Removal ToolSIQUK
- High quality abs, the nylon nozzle can endure high temperature, the sponge can absorb static electricity, thus it can be used for a long time. Solder wick with copper and rosin - 6 pieces solder braid in 3 size, geometrically-precise weave, 2 pieces per size, 1.5m long, 2. 0mm/2.
5mm/3. 0mm wide, can be used to clean the spare solder on the pin away to avoid short circuit, meet your various soldering needs. Wide application - the solder wick & solder pump can be used to correct mistakes with small boards on PCBs, unsoldering old wire from devices, desoldering computer parts such as a motherboard, re-solder mechanical keyboard switches, remove relays and other components from printed circuit boards, clean alloy on smd components and so on.
Solder sucker with high efficiency - the desoldering pump is designed with double ring double open and "vacuum" button, you can just cocking it and pressing the trigger button with one hand to remove solder from circuit board effectively.
Solder sucker with high quality - the desoldering pump is designed with ABS body, which make the solder sucker delicate and durable, sweat and heat, non-slip sponge and nylon nozzle.7-in-1 solder removal tool - 1 pcs solder sucker and 6 pcs solder wicks in 3 size, a multiple-choice electronics kit, the desoldering wick absorbs solder and the desoldering pump pulls it away quickly.
Winfred 6 Pieces Desoldering Braid Wire Electrical Solder Wire Solder Wick Soldering Tin Remover Wire Solder Remover Tool 1.0/1.5/2.0/2.5/3.0/3.5mm 1.5 m LengthWinfred
- Desoldering wick with copper braid6pcs solder braid with the size 1. 0/1. 5/2. 0/2. 5/3. 0/3. 5mm width, 1. 5m length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
Wide usagesuitable for diy and electronic bonds, phone mother board, home DIY hobbyists, appliance repair, such as welding circuit board, watches, jewelry welding.
Tip tinnerquick and efficient removal of oxides from the soldering tip allows the soldering tip to return to light and re-stamp.
Improve work efficiency and not damage the board. Warm tipsplease pay attention to safety when using welding tools. Desoldering wickwith low residue design, this solder braid will help clean spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
5. MG Chemicals
1.5 m Length x 1.5 mm Width, MG Chemicals 424-LF Fine Braid Super Wick™ Desoldering Braid for Unleaded SolderMG Chemicals
- Nsf - nonfood compounds program Listed P1, Nsf Registration #154375. Rohs compliant. Specifically designed for high temperature, lead free solders. Use to remove lead free solder during circuit repair. Great with conventional tin/lead solders. For lead free solder.
Solder Braid Wire Desoldering Wick Desoldering Wick Solder Braid Wire Low Residue No-Clean Solder Tin Remover Tool, Huayue 7 PCS Desoldering Wire, 1.0/1.5/2.0/2.5/3.0/3.5 mmHuayue
- No-clean design: tin remover desoldering wick is effective in removing and absorbing solder, no need to clean, and leaves almost no residue after use, convenient and fast. Prevent short circuit: desoldering wire can absorb the tin stuck on the pins to ensure that there is no short circuit between the pins.
Different sizes: you will get 7 pieces solder remover wicks, computer motherboards, meets your different desoldering requirements.
Suitable for desoldering of printed circuit boards, cell phone boards, including 1. 0/1. 5/2. 0/2. 5/3.
0/3. 5 mm, etc. Quality material: solder braid wire is made of premium copper wire, oxidation and corrosion resistance, excellent thermal conductivity and tin absorption. Flat knitting: fast heat conduction, suitable for fast tin absorption to reduce the risk of thermal damage to the circuit board. It can also be used to clean the pads of BGA components.
Solder braid with 2.5mm Width, 1.5m Length and Solder Sucker Desoldering Vacuum Pump Solder Removal Tool,Blue, 2 Packs, EVERMARKETTM Desoldering WickEVERMARKET
- High quality desoldering braid with unique no clean flux and gemetrically- precise weave. Excellent thermal transfer for faster, safer desoldering using lower temperature irons. Pure oxygen free copper wire with 01"w x 5'l, weight 04oz.
Special design: right or Left handed design allows easy one-handed use. High quality solder sucker & light material: Super high pressure vacuum with aluminum body frame with right size: 7-1/2" length x 3/4" diameter.
CMJ x2 Wick CP2015 Desoldering Solder Remover Braid Wick 2.0mm Xbox BGA Total 1.5mCMJ
- Length: 1. 5m width: 2. 0mm instructions - Place the soldering iron onto the solder to be removed. Remove the wick from the item and cut off the used section.
2. 0 mm wick de-soldering braid cp-2015 2 reels each 1. 5m in length similar to and as good as goot wick. When the solder melts place the wick onto the solder and the solder will be absorbed.
FADACAI 1Pc 3.5mm 1.5M Desoldering Braid Solder Remover Wick Wire Repair ToolFADACAI
- Avoid the high temperature destruction of electric pad. Design in precision, guarantee the max surface tension and the ability of absorbing tin.
Length: 1. 5m; width 3. 5mm. High efficiency and save the electric repairing time. Oxidation resistivity and anti-corrosion protection, good thermal conductivity.
10. MG Chemicals
MG Chemicals Desoldering Braid #3 Fine Braid Super Wick for Lead Free Solder, 0.075" Width x 5' LengthMG Chemicals
- For lead free solder. Great with conventional tin/lead solders. Nsf - nonfood compounds program Listed P1, Nsf Registration #154375. Use to remove lead free solder during circuit repair. Rohs compliant. Specifically designed for high temperature, lead free solders.