As an Amazon Associate I earn from qualifying purchases.
BFFDD Woodworking Band Saw Machine Jigsaw Metal Cutting Rosary Open Pull FIower Small Home Band-Saw Multifunction Saw Cut Tools Color : 8 inchesBFFDD
- Wide range of application suitable for cutting soft metals and other materials, wood, etc. Not suitable for hdf, acrylic, plastic, such as aluminum, iron, steel and other materials.8-inch band saw: no laser, no lighting.
Reliable quality the table saw adopts high-grade metal materials and selected electronic components, with long service life and stable performance. Portable size this table saw is light and compact, saving space, and convenient to transport to other places or store at home. 9" band saw: band Laser LED Light.
|Weight||0 kg (0 Pounds)|
Blue, FlowerW Metal Bandsaw 1000W Vertical Metal Bandsaw 0°-45° Metal Band Saw Metal Table Top Bandsaw Table for Metal for Cutting Wood Metal Glass Fiber PlasticFlowerW
- Gear drives. Low vibration and noise for a quiet and high tension cutting environment. Durable saws with adjustable cutting angles are ideal for bulk cutting. Blades of high accuracy: your table top bandsaw for metal is fitted with a 1325x13mm, 065mm thick metal blade, variable tooth formation of 8-12 teeth per inch.
The table top metal band Saw can be rotated from 0°to 45°. Versatile metal bandsaw: the bs-85vertical metal bandsaw boasts aluminum-casting structure, environmental and practical design of low noise and low energy consumption.
The benchtop bandsaw can perform most of the cuts possible with this machine, plastic and other materials.
Anti-slide handle: the ergonomic handle is made with an on-off, metal, suitable for cutting wood, glass fiber, easy operation with single hand. Compact for bench top use, heavy duty steel base, designed for dry cutting. Adjust the blade tension by turn the handwheel before starting cutting. Sharp and durable. Power source type: ac/dc. Soft start, variable speed knob. High performance, stability and low energy consumption.
|Height||18.11 cm (7.13 Inches)|
|Length||27.95 cm (11.01 Inches)|
|Weight||18.6 kg (41.01 Pounds)|
|Width||14.57 cm (5.74 Inches)|
Toplionace Hand Held Bandsaw Machine, 220V Portable Metal/Nonmetal Sawing Machine Small Electronic Speed Regulation Saw MachineToplionace
- Narrow slit 065mm, high precision, flat cutting surface, greatly improve work efficiency. Safe and pollution-free operation, no ozone, no sparks, no cutting iron powder flying, safe operation.
Light-duty site mobile operation: gas pipe, electrical operation, mechanical workshop operation, water pipe, construction and other cutting operations.
Wood, plastic materials, aluminum, chromium / nickel alloy, copper, stainless steel, iron, fiberglass, etc. Simple operation, automatic cutting and automatic power-off protection. Wide range of application, both metal and non-metal within the specified hardness range can be cut.
Toplionace 220V GFW4013 Metal Band Saw Machine 5 Inch Portable Small Metal Band Saw Machine 2250-4800rpm 550WToplionace
- Electric metal band saw machine. Cutting capacity: 130*125mm/ 80*100mm. Speed: variable. Blade speed: 30-80m/min.
Crafting And DIY, Dust Extraction | Bandsaw For Woodworking, Parallel Stop, Einhell TC-SB 200/1 Band Saw | Electric Bench Saw With 45° Tiltable Metal Work Table For Mitre CutsEinhell
- High performance band saw with smooth tilting saw table from -4 to 46 degree. Rip fence for the execution of straight cuts.
Parallel stop bar and jig for dust exhaust devices. Ball-bearing guide for precise cuts. For sawing wood, plastics and other such material. Height adjustment for precise cuts.
|Height||68 cm (26.77 Inches)|
|Length||45 cm (17.72 Inches)|
|Weight||17.35 kg (38.25 Pounds)|
|Width||60.5 cm (23.82 Inches)|
|Warranty||2 year warranty.|
2pcs Band Saw Tire Bandsaw Rubber Band for 8" 1425mm 9" 1570 12" 2240mm 14" 2560mm Woodworking Band Saw Tires Scroll Wheel Ring Parts ZRONG Color : 9 inchZRONG
- First: disassembling old "tires", and clean the machine of any dirt, debris, or adhesive. This made installation relatively easy. If you can’t, please used a clamp to hold the tire on the wheel in the spot, and then used a screwdriver to pry the rest of the tire on.
Then ran the screwdriver around the wheel several times to make sure the tire was uniformly stretched around the wheel. Next, reinstalled the wheels and readjusted everything, rolled the wheel on a concrete floor, made sure the tires were properly seated in the groove on the wheels, pushing down pretty hard with your hands.
After mounting, finish! The rubber band will then be held in place by a combination of tire glue and the tension of the band itself.
Mounting: the tires can be fitted by stretching them on by hand. After mounting, removed the clamp and pushed the shaft of the screwdriver completely under the tire, so it was between the tire and rim. Apply adhesive：then use an adhesivenot included to secure it.
|Weight||0.3 kg (0.66 Pounds)|
VEVOR Sheet Metal Brake 3-in-1 12-inch Shear Press Brake 20-Gauge Capacity Combination Sheet Metal Machine Shears and Slip Roll Machine for Shear Bending RollingVEVOR
- Roll diameter: 39mm. This ensures adjustability and high accuracy. Flexibility & precision: the vertical press brake portion of the shear brake roll machine has a maximum bend angle of 90 degrees with adjustable fingers on the top beam to easily assist with making any size boxes.
Manual operation: you can operate the machine with this lever to make any bendings and rollings as you need. All-in-one brake machine: industrial 12in 3-in-1 sheet metal machine is a smart choice for shops.
Multiple utilization: widely used in factories, etc. The shear can be used for mild steel, copper, aluminum, workshops, plastic, shops, brass, lead, and zinc. Solid construction: this 3-in-1 brake shear roll has a heavy cast-iron frame.
Thickness: 20Ga. The slip roll portion of the shear brake roll has hardened and polished shafts for long life. Designed to perform in a harsh condition and can stand for longer life. This 12" brake shear roll can be utilized to cut multiple materials. This machine combines three functions into one that utilizes up little floor space and enhances work efficiency. Max. Bending angle: 90°Max.
|Height||52.07 cm (20.5 Inches)|
|Length||51.05 cm (20.1 Inches)|
|Weight||44.9 kg (98.99 Pounds)|
|Width||35.05 cm (13.8 Inches)|
|Model||Metal Brake 3-in-1 12-inch|
CREWORKS 550W 7''x14'' Mini Metal Lathe, HP Motor Mini Benchtop Metal Lathe w 3-Jaw Chuck, 50-2500 RPM Power Metal Lathes for DIY Machining Wood & Metal Working ToolCREWORKS
- High precision: driven by a ¾ hp motor, this miniature metal lathe is designed for high quality precision craftsmanship with spindle accuracy to within 00004" 001mm. The v-slideways with distance between center is 350mm14".
Varilable speed: this 550w metal lathe can be operated manually or automatically with a spindle speed range of 50-2250 Rpm. Wide application: our mini benchtop metal lathe can be used for small part machining, sample machining and modeling work.
It's the perfect addition to your workbench!16 tpi reversible lead screw. 3-jaw chuck: 3-jaw self-centering chuck ensures perfect placement without excessive trimming.
By changing the angle of the tool column, the positions of inward cutting, end face cutting and bevel cutting can be realized. The feed speed can be adjusted according to the requirements of different workpieces. Professional cross slide: designed with abrasive resistance, moving blades freely with feed rod.
2pcs Band Saw Rubber Tires Ring 8" 1425mm/9" 1570 or 1575mm/10" 1826mm for Wood Metal Scroll Wheel Band Saw Machine ZRONG Size : 8 inchZRONG
- The rubber band needs to be stretched. 10" rubber band use for scroll Wheel diameter 250mm, advice band saw blade length is 1826mm. After receiving the goods, put them in hot water and heat them to spread evenly.
Then hang it hard on the wheel without adding glue!8" rubber band use for scroll Wheel diameter 205mm, advice band saw blade length is 1425mm. 9" rubber band use for scroll wheel diameter 230mm, advice band saw blade length is 1570 or 1575mm.
|Weight||0.3 kg (0.66 Pounds)|
10. dirty pro tools
Metal Band Saw with Base Stand Electric Horizontal and Verticaldirty pro tools
- Designed for use in the maintenance workshop, The 350W motor gives smooth and accurate saw blade transmission through the adjustable ball bearing guides.
Blade specification - length x width 64-1/2''×1/2''1640×13mm. Supplied with transport wheels, tool shelf, plastic blade guards. A versatile three-speed machine offering horizontal and vertical cutting capabilities.