Top 10 approved Voltage Indicator UK – Voltage Testers

As an Amazon Associate I earn from qualifying purchases.

1. Fluke

Fluke T90 Voltage & Continuity Tester, Yellow

Fluke - Led indicators show detected aC/DC voltage presence, Low battery indicator, Detects voltage even when the batteries are discharged. An essential part of any electrician's selection of tools, the Fluke T90 contains all of the functionality you need for accurate and reliable two-pole voltage and continuity testing.

Ideal for use in any low voltage electrical outlet, the T90 can be used to measure voltage across a range of 12V to 690V and continuity from 0 to 400kΩ with audible indication. Improved probe docking system ensures that probes are protected when stored, Push on probe tips reduce metal exposure from 19mm to 4mm, WearGuard indicator shows damage to test leads.
Height3.8 cm (1.5 Inches)
Length23 cm (9.06 Inches)
Weight0.18 kg (0.4 Pounds)
Width6.5 cm (2.56 Inches)
Part NumberFLUKE-T90
Warranty2 year manufacturer

2. Martindale

Martindale VIPD138 Voltage Indicator and Proving Unit Kit

Martindale - Includes voltage indicator, proving unit and carry case. Polarity and Voltage indication from 12 V. Heavy duty double insulated leads. 440 v ac proving device. Bright LED indication.
ManufacturerMartindale Electric Co Ltd
Height10 cm (3.94 Inches)
Length26.5 cm (10.43 Inches)
Weight0.53 kg (1.17 Pounds)
Width10 cm (3.94 Inches)
Part NumberVIPD138
Warranty2 year

3. Kewtech

Kewtech KT1780 2-Pole Voltage Detector & Continuity Tester With LED Display and Torch, 690 V, No Size, Green

Kewtech - The kt1780 voltage tester measures ac and DC voltages up to 690, providing clear LED indication of the detected voltage level. The kewtech brand has become synonymous with high quality, as we manufacture innovative, accurate and reliable test equipment specifically for the UK market.

Perform continuity, single pole phase, polarity and phase rotation testing as well as a self diagnostic test to ensure correct operation. Slender uk specific probe tips that fit into recessed terminals such as RCBOs. With gs38 compliant slender probe tips and designed to the new international standards IEC 61243-3, IEC 61010-1 and measurement category CAT IV 600V.
Height4 cm (1.57 Inches)
Length29 cm (11.42 Inches)
Weight0.2 kg (0.44 Pounds)
Width7.5 cm (2.95 Inches)
Part NumberKT1780
Warranty1 year manufacturers warranty.

4. Martindale

Yellow, Martindale VI13800 Safety Voltage Indicator

Martindale - Bright leds with polarity Indication. Gs38 and bs en61243-3: 2010 compliant. Heavy duty double insulated leads. Voltage indication to 440 V. Industry standard voltage indicator.
ManufacturerMartindale Electric Co Ltd
Height2.7 cm (1.06 Inches)
Length20.5 cm (8.07 Inches)
Weight0.13 kg (0.29 Pounds)
Width6.7 cm (2.64 Inches)
Part NumberVI13800
Warranty2 year

5. Kewtech

Kewtech KT1780 Voltage Tester

Kewtech - New clear audible tone. New clear oversize luminous LEDs shine through voltage level. New uk specific gs38 slender probe tips NO NEED to swap ends. New bright torch light - gives ample illumination.
Height50 cm (19.69 Inches)
Length50 cm (19.69 Inches)
Width50 cm (19.69 Inches)
Part NumberKT1780
Warranty1 Year

6. Fluke

Fluke Combo Kit, Comes With Fluke 113 True RMS LCD Multimeter, 1AC Voltstick/Voltage Detector/Indicator & C115 Soft Carry Case From Testermans, 600 Volt AC/DC, 325 Clamp Meter 400 Amp AC, a Fluke approved distributor., TPAK3 Magnetic Meter Hanging Kit, KIT77

Fluke - Fluke 113: true-rms for accurate ac measurements on non-linear loads. Fluke 113: a large backlit display allows for easy visibility in low-lit areas. Fluke 113: meets measurement category cat iii 600 V and Category IV 300 V standards for a higher level of safety. Fluke 113: diode test for testing general-purpose germanium, silicon, and power diodes. Fluke 113: vchek loz low impedance measurement function to simultaneously test for voltage or continuity.
Part NumberKIT77

7. Martindale

Martindale VT12 Two Pole Voltage and Continuity Tester

Martindale - Probe caps for GS38 compliance. Led voltage indicator. Measures 12 v to 690 V. Includes continuity test.
ManufacturerMartindale Electric Co Ltd
Height2.7 cm (1.06 Inches)
Length20.5 cm (8.07 Inches)
Weight0.13 kg (0.29 Pounds)
Width6.7 cm (2.64 Inches)
Part NumberVT12
Warranty2 year

8. Knightsbridge

Knightsbridge TE1 Test Equipment CAT III 2-Pole Tester

Knightsbridge - Power source type: battery powered. Tools. Ip64 cat iii 690v 2 pole voltage tester with led and lcd display. Self proving function with handy built in led torch function. Ip64 rated - 12-690v ac/dc - cat iii 690v/cat iv 600v - self proving - requires 2 X AAA batteries not included. Model number: TE1.
Height3.35 cm (1.32 Inches)
Length25.5 cm (10.04 Inches)
Width6.1 cm (2.4 Inches)
Part NumberTE1
Warranty1 year.


ULTRICS Digital Multimeter, Voltmeter Ammeter Ohmmeter Circuit Checker with Backlight LCD Test Leads, Portable Multi Tester Measures OHM AC DC Voltage Current Resistance Continuity Diodes Transistor

ULTRICS - Reliable performance this digital multi tester includes test leads and 9V battery, overcharge protection on all ranges, low battery indicator. Works as a voltmeter, ammeter, diode, AC/ DC voltage, transistor HFE, ohmmeter testing continuity, car battery tester.

Double insulation with a stand for good viewing angle. The safe device of upgraded 1000V 10A probes. Diy testing tool this mini multi measurement device or tool is useful in the laboratory, education, workshop, factory. Durable and safe can be handheld or used with a fold-out stand, a thick rubber case protects the multimeter from splashes, minor bumps.

Multipurpose use compact digital multimeter ideal for commercial and home use. Comes with 12 month warranty and world-class customer service. Recommended by professionals/ engineers. Lcd backlit display professional multimeter tester's display is visible from different angles, making value easily readable in low light and dark places. Data hold function makes measuring easier.
Height5 cm (1.97 Inches)
Length14.6 cm (5.75 Inches)
Weight0.24 kg (0.53 Pounds)
Width10 cm (3.94 Inches)
Part NumberFBA-0021-YB
Warranty12 Months Limited Warranty

10. Martindale

Yellow, Martindale VT28PD Two Pole Voltage and Continuity Tester with Proving Unit Kit

Martindale - Led and lcD indication. Carry case with neck strap. 690 v proving unit. Measures 12 - 690 v AC/DC.
ManufacturerMartindale Electric Co Ltd
Height10 cm (3.94 Inches)
Length32 cm (12.6 Inches)
Weight0.58 kg (1.28 Pounds)
Width10 cm (3.94 Inches)
Part NumberVT28PD
Warranty2 year.